The 2. spray gun adopts a detachable process. The gun body is designed by ergonomics, and the spray is uniform and no leakage. The design of the airflow loop blocking is adopted to better solve the blockage of the spray gun.
3. The suction of the suction gun is 0-600mmhg, and the suction can be adjusted.
4. The pressure of blowing gun is 0-0.28pa, and the pressure is adjustable.
5. Power of laryngoscope preheater: 450W, heating time adjustable (5-25s).
6. LED light source is used for lighting, illumination is more than 12000lx, color temperature is more than 6300k, indication is more than 80, service life is not less than 100000 hours, light spot adopts spotlight design. The lamp arm is equipped with damping balance, and the forward non angle positioning is convenient and accurate.
7. LCD touch control system, sensitive response, LCD display function indicator, clear guidance; can control the host unit, electric patient chair.
8. The whole machine adopts the design of human safety voltage, and the host can control each working unit; when the machine is turned on, the host will automatically alarm and cut off the power supply when there is a fault.
9. The main and auxiliary design of centralized sewage device is adopted, which meets the environmental protection requirements of the international medical system (ISO13485). The sewage bottle has the upper limit alarm function.
10. The positive pressure pump is imported with original equipment, the power is greater than or equal to 75W, and the maximum pressure can reach 35kg / cm2
11. Negative pressure pump power ≥ 350W, maximum suction ≥ 700mmhg
12. The brightness of LED film reading lamp is adjustable, and the light is uniform, with long light and inductive switch mode.
13. Built in trash can, stainless steel trash pan, tweezers cup, rigid tube endoscope disinfection device.
15. The electric patient chair can be controlled by the foot switch and the host, which is convenient for different operation and control. Load bearing capacity ≥ 260kg, lifting stroke: 450-600mm, backrest stroke: 90-185 degrees, adjustable.
16. Head lamp for medical examination
16.1 the lamp cap is supported by flexible hose, which can be adjusted 360 ° freely, and the lighting direction can be easily positioned.
16.2 the lamp cap adopts heat dissipation stripe structure, which greatly improves the heat dissipation of the product and effectively improves the service life of LED lamp beads.
16.3 the diameter of the lamp cap is small, and the coaxial lighting without shielding can be realized
16.4 the front touch switch design greatly improves the convenience of the use process.
16.5 the adjustment range of headband should not be less than 520mm ~ 640mm
16.6 five level brightness adjustment, suitable for different illumination requirements.
16.7 memory function: automatically memorize the operation status before power failure after power failure, and automatically run the operation status before power failure after power recovery.
16.8 intelligent heat dissipation protection: automatically monitor the lamp cap temperature, and automatically adjust the heat dissipation mode when it reaches the preset value.